This accessory helps to quickly cut parts of the same width. Last year we made a walnut sideboard with bluetooth speakers. And this is the 2nd part. I have tried various ways of cutting veneer and for me the best method is to use utility knives. This way I align the edges of the veneer for later gluing. We will also need 8mm maple strips. For a clean cut, we pull the saw in the opposite direction. Some people think veneer furniture is a really cheap option for solid wood furniture.
Actually this is not the case. We use Kleiberit 152.0 contact adhesive for bonding. After applying the glue you need to let it dry for 5 minutes. After that, you need to press the veneer with maximum effort. Festool Domino is not a cheap tool, but it does its job 100%. You have to be very careful when sanding veneer. Very easy to sand through 0.6 mm thick veneer We use walnut and maple veneer for the door. The design of the doors was invented by us and we didn't know what it would look like after the work was completed. We are happy with the result. How do you like this design? The door is actually heavy so I had to use 4 hinges. These are Blum hinges. Hinge with large opening angle and Zero Entry 155°.