Hey everyone it's Dylan from The Black Forest WoodÂ
Company this week we are going to be doing our  largest furniture delivery we have ever done overÂ
a hundred thousand dollars in furniture so we're  very very grateful to our clients for letting usÂ
create all this and i hope you guys enjoy it too  we we're speechless you know it's not too manyÂ
times we're actually speechless after a delivery  but we will let the furniture do the speakingÂ
enjoy you guys one thing i want to mention too  before we get going into this is you guys willÂ
want to stick around to the end of the video  because we are going to announce a giveaway winnerÂ
we had you guys guess how much this was worth so  stick around to the end and see if you endedÂ
up winning so we're about to do something that  we do not recommend you uh ever really doÂ
unless you have the proper cooling setup  we're gonna pour our resin at five and a halfÂ
inches thick to cast this piece of maple burl  um no water cooling even on this tableÂ
just an aluminum mold with a bunch of fans  using our black forest resinÂ
and hopefully, it works let's go well we probably should have listenedÂ
to our own advice when we said that we  don't recommend doing a pour like thisÂ
because it didn't go exactly how we planned  as you can see there is a lot of small air bubblesÂ
that are kind of coming up from underneath the  bottom of this so those would have come out whenÂ
the resin heated up it would have got warm and  push those air bubbles out from the bottom youÂ
know it's not it kind of makes a cool effect but  it's definitely not what we were going for um soÂ
i don't expect our client to have to accept this  we may have to pour something else i am stillÂ
going to show it to her and see maybe she will  like it because it does look kind of uniqueÂ
but didn't really go the way we thought it was wow so now that all of the carcass componentsÂ
of the cabinets are finished we can actually  go ahead and assemble them so they're allÂ
uh canadian ash that we put a black and  finish on and those stripes you see goingÂ
down the edge those will get brass in them  we just want to put the cabinets together first soÂ
now that the cabinets are together we can actually  start uh finishing the doors so all of the doorsÂ
are in maple burl with black forest deep resin  and we're actually applying our Black ForestÂ
Furniture Oil to these pieces here so we're gonna  do two coats on all surfaces of the doors andÂ
that's going to help to bring a lot of clarity  to that epoxy and one thing that we like to doÂ
when we're applying is actually use a mirka sander  just to help work that in so we'llÂ
apply a very small amount on the surface  and then we use the Mirka just to evenÂ
everything out and get that nice sheen so  now that everything's finished we can go ahead andÂ
load the stuff up in the truck and just our luck  right as we're ready to leave for this deliveryÂ
a cold snap hit so it's about between minus 20Â Â and minus 30 so we actually had to get a specialÂ
heated truck so that none of the components would  get too cold there is a chance that it wouldÂ
be okay even if they got cold but a drop in  temperature causes wood to shrink and it causesÂ
resin to shrink so we just wanted to be safe yeah because I think now weÂ
can set the other card on here them get one part inside the house yeah okay liftÂ
it up to that do you think we can just carry it  in pick it up yeah I think we can get enoughÂ
bodies yours would uh it would clear the doors  right there okay yeah okay allÂ
right we'll get the other card is that your toe yeah ooh got my toe here you can slide it over  anywhere between the two cards it mightÂ
be gone just to give us it's probably gone  i think we should have aÂ
two on the bottom at least  in the bottom okay it's a little bitÂ
nicer oh yeah you guys just lift high you're still pretty cool you should set it on your other toesÂ
even though my fingers are sliding out  yeah the foam's not not the best not super grippy loading the truck all back up and that's my jobÂ
yeah you're being lazy i am being lazy i'm going  to keep everything organized we're here atÂ
our customer's residence out by kamloops and  finally, the day has come it is the 22nd ofÂ
December we promised it before Christmas  and we've done it we just have to assembleÂ
everything now garbage man I'm the garbage man go garbage that's it I'm theÂ
garbage collector go garbage wow that's beautiful yeah probably theÂ
most beautiful desk i've seen yeah by far  the [ __ ] we make is amazing you guys we'reÂ
getting first we're supposed to be because  dylan designs all this stuff i have nothingÂ
to do with the design he draws all this did  you design the legs on these? Yep that's coolÂ
he does all the drawings on SketchUp and then  we figure out how to build it so give him creditÂ
right yeah I don't have to know how to build it the credenzas go right here okay yeah yeahÂ
those are on wheels okay good let's keep  them on wheels we'll just have to clear out theÂ
credenzas yeah they go here okay let's get the  fossil cabinets in first then so the lastÂ
thing we bring in is the two that are here  okay no i was trying to step over that oh my god okay are we on we are on let's go nice and slow wow mirror's still intactÂ
all right nice okay i'm gonna wipe right now then there you go all right give me a second as you can yeah we were just practicingÂ
these things for 140 bucks  that's crazy i know how didÂ
you use them they are really oh look at that all right should we start taking foam offÂ
yeah we could probably do that yeah come back a little bit okay go there we go okay so we'll maybe push this over to one side andÂ
bring the table aside put the carts right on  the end we'll roll this under and then it's onlyÂ
a couple millimeters away from the bottom of the  table so we can just put our inserts right in butÂ
then we'll have to lift the weight of the table  and the base yeah yeah just for a second it'sÂ
going to be easier than maneuvering it it will  so we'll just have it six guys will have to justÂ
suspend it but one person pulls all the cards away  and we'll just drop her down yeah six guys yesÂ
well that's all we have it's easier than holding  the table while we try to line everything upÂ
yeah will daniel align the base underneath  it's just gonna line these squares with some bigÂ
you'll see the big squares cut underneath there  okay so do you want to do aÂ
test lift and just see how long  or how bad it is to the end yeah okay you wantÂ
to try it yeah let's just see these people here that might be easier no because it'llÂ
hit on the point yeah we can't have  that right it's all got to go downÂ
so it's going back that way okay there is that both or just one uh the other that's it man looks sweet oh how much does theÂ
table weigh it's probably about 1500 pounds  just for the top and then what do you guys thinkÂ
the x space is like 150 200 probably about two  yeah so you're you're almost one ton for theÂ
entire table so it was easy to lift this easy yeah not this but everything else just wannaÂ
make sure we have enough microfiber to  set up and we're happy with that wasÂ
this a little bit more a little bit more  yeah you want to line it up perfectlyÂ
in the cabinet yeah there you go  yeah, that's excellent was this theÂ
biggest one you guys did? this yeah yeah no way like we did we did do one that wasÂ
bigger but it was um well we've done a couple  bigger but our biggest one was like 28 feet byÂ
eight feet but that was no resin that was just  solid wood yeah was that all in pieces four piecesÂ
yeah that was in four pieces like a really long  room right yeah it almost looked like aÂ
castle or something it was like a castle yeah  so jack's just putting our ceramic coatingÂ
on the edge of this table right now  and you can see it makes a massive differenceÂ
in the clarity of the epoxy so now that full  burled edge is going to be visible andÂ
it's nice with the ceramic too because  that wet look doesn't it doesn't go awayÂ
after you wipe it off no it stays nice  just tip it pick it up kinda pick it up okay get to the corner here's the inserts it's like oh no that's not an option yeah we'll be figuring something else out here now i love it with the bubbles to beÂ
honest it reminds me of the ocean I showed my little brother look at that would you look at that oh might be some damage 29Â Â yeah well we have let's see what time it is we gotÂ
here at 9:00, it's 3:30 right now so we've spent  just about the whole day here and we're basicallyÂ
done so we're going to do the walkthrough that  our clients have been amazingÂ
by the way i have to say that  probably my favourite clients we've ever workedÂ
with so let's go see what we did for them  so first thing that we see when we walk in theÂ
front door are two maple burl credenzas they  have fresh ceramic so i can't open themÂ
right now but essentially we've got one  shelf going across the middle compartment and twoÂ
shelves on either side and then all custom brass  detailing across the front with black and ashÂ
carcasses so that's the first thing you see then  if you look straight in front of you there's theÂ
console table now this is a pore that we we said  we were going thicker than we should have and itÂ
got a whole bunch of bubbles because it cured too  fast but it actually ended up looking really coolÂ
and our client loves it too she loves the bubbles  so that's that's why those are in there but theyÂ
they really kind of do provide this neat effect  that we also probably could not replicateÂ
because we would risk just cracking it  instead of making these bubbles so this is veryÂ
unique this piece i love the brass too yeah then right next to the console table in frontÂ
of the couch is a coffee table again everything  here besides one piece is done in maple burlÂ
all from the same tree matching legs of course  deep blue-black forest resin without metallicÂ
so this is just done with liquid dyes and it  just ties into the maple so perfectly and thenÂ
this we didn't do this but i have to show our  client collects fossils they're absolutelyÂ
stunning some really one-of-a-kind pieces in here  and a lot of it's from Alberta too which is quiteÂ
quite neat now into the dining room here is our  14 foot by 5 foot maple burl table again the mostÂ
resin we've ever used for a single pour and we did  14 custom chairs to match this so these are alsoÂ
all in black and ash and then we've got Italian  euro soft leathers on the seats and in in theÂ
shop, it's funny we were kind of unsure about the  color but once you see them in here it just reallyÂ
ties everything together and if you peek through  the chairs we've got our largest x-base that we'veÂ
ever done with the brass dowel for support and  some extra bracing on the bottom too because thisÂ
table is about 1500 pounds so we had to we had to  put more bracing in than we usually have to makeÂ
this work and then down at the end its king John here's the cabinet so again maple burl  blue-black forest resin brass detailing black andÂ
ash carcass is absolutely incredible John killed it  on this piece, he did so so good and then JackÂ
2 with all the finishing absolutely incredible  okay and then this piece is it's got a cool storyÂ
so our client she actually had her daughter help  her pick out a lot of the details in this uh andÂ
because her daughter was so helpful she actually  surprised her with this desk for herself so thisÂ
is going to be her daughter's study desk again  black and ash these are all just drawersÂ
with the soft close hinges on them  one detail I'll point out too is we've actuallyÂ
got dovetail joinery all on this outside edge here  hard to see with the ash but that's all dovetailedÂ
and just just a nice little detail and then we've  also got our dovetails in the cabinets we've gotÂ
this bar that kind of helps give it that floating  look and this one is a little differentÂ
this is white oak with turquoise resin  but it's upstairs and away from everything soÂ
it just looks really good in this space well  that delivery went absolutely awesome and if youÂ
guys have been following along for this furniture  package on our channel you remember that back inÂ
november we posted a video called 25 000 maple  burl dining table and we actually gave you guysÂ
the opportunity to win a custom piece of a wall  art with an off cut from this package all you guysÂ
had to do was guess the exact price of the package  and it actually was an even number so someoneÂ
did get it exactly bang on uh it was a hundred  and twenty thousand dollars and ilarian parmetÂ
we'll put it on the screen it's probably easier  than me showing my phone but yeah i larry andÂ
parmit you won so send a d or an email to dylan  at blackforestwood.com and we will go throughÂ
the entire process of guessing a custom piece  or designing a custom piece sorry not guessing oneÂ
so you'll get to pick your color pick your layout  pick your size within reason it's not goingÂ
to be massive but you're going to get the same  experience that all of our other customers get andÂ
unfortunately if you haven't responded in one week  we are going to go to the next person who guessedÂ
it so hopefully you're a regular viewer thank you  to everyone else who entered and we will be doingÂ
stuff like this more often too so keep an eye out  and charlie just wanted to say too that he reallyÂ
appreciated all those entries and everyone who  commented uh he couldn't go on the delivery heÂ
had to stay here and man the shop someone had  to stay but he was proud of us well thank youÂ
guys for taking the time to watch that video  which honestly today did not even feel like workÂ
we were just having fun all of us all day long  huge huge pleasure huge thank you to our clientsÂ
for again for letting us do this and being so  hospitable to us it's probably my favorite clientsÂ
i don't know yeah yeah that this was awesome so  here are the two main big pieces and then youÂ
guys got to see everything else so what I want  you guys to do in the comments is let us know whatÂ
your favorite aspect of this furniture package is  we're also we probably already had it in the videoÂ
we're announcing that giveaway winner we haven't  picked the winner yet here but we probably wentÂ
back to calgary and already put it somewhere else  in the video so congratulations to you if you wonÂ
and just send me an email dylan blackforcewood.com  and we will get your art piece sent out soÂ
thank you guys for watching and we'll see you  next time so we're back in calgary now and i justÂ
wanted to say a moment to give a huge huge thank  you to our clients they were so accommodatingÂ
to us very friendly very generous as well and um  i have to clear the air she cried our client didÂ
cry because she was so just happy and in awe of  everything we obviously didn't want to film thatÂ
and invade their privacy but she had to step away  a few times because it was just so overwhelmingÂ
all this beautiful furniture so that's  very very humbling for us you know we've we'veÂ
only ever had that happen a couple times before  but it just it really makes it all worth it makesÂ
us feel special so thank you again to our clients.
