Old Nordic hammer restoration I will try to reuse the hammer shaft This needs sandblasting I will use white aluminium oxide And 110 psi when sandblasting the hammer Sandblasting IF YOU ENJOY THE VIDEO – PLEASE CLICK LIKE After sandblasting I will improve this surface And both ends of the hammer I will do a beautiful engraving here But first I need to remove the scratches Using a soft cleaning disc Sanding at grit 1500 I gave it a little polish too This is the logo TOR I want it to look more Nordic Now I will do a quick sketch And engrave it on the hammer I will engrave this on the hammer The hammer is asymmetric So I need to level the hammer head I will split the engraving into two parts I takes many hours of programming To make this custom engraving Adjusting the laser Laser test programme Laser engraving the custom logo Now comes the hard part To fit the two engravings perfectly PLEASE SUBSCRIBE TO MY YOUTUBE CHANNEL Polishing the engraving I need to grind away the craters And then I sand it at grit 1500 Creating the wedge PLEASE TELL ME WHAT YOU THINK OF
THIS VIDEO IN THE COMMENTS BELOW
