hello once again and welcome dear friends of the
Felder Group today we are going to show you the hammer HNC from the technical perspective
the dimensions are generous despite its small external dimensions it offers a large working
area especially at the height of 160 millimeter ideal also for shipping and it fits exactly on a
euro pallet delivery is easy and economical and even though it weighs approximately 80 kilos it
can be placed anywhere in the house or workshop by just two persons even the way shows how
solid the construction is designed the base frame consists of the large extremely robust
t-slot aluminum table due to the T slots almost unlimited opportunities of mounting and clamping
are possible extremely flexible even for self-made mounting methods as well as for your personal
preferences on how you want to clamp furthermore all key parts of the basic construction are made
of solid steel which in combination with the generous aluminium elements results in enormous
torsional rigidity this torsional rigidity is unique in this machine class just like on
the big production machines we have mounted two trapezoidal linear guides on all of the three
axes these profile linear guides not only provide for stability they are also very precise and
above all and most importantly they ensure repeatability they are designed large enough to
absorb even the greatest forces during machining another huge advantage because of lifetime
lubrication is no maintenance and insensitive vd – contamination by the way repeatability each
axis is equipped with our innovative trapezoidal thread nuts – nuts pre tensioned with Springs
which especially reduced the axial and reverse backlash to a negligible minimum the result
is precision without compromise the axes are driven by large dimensional stepper motors the
drive unit is decoupled from the stepper motor using a special tooth belt and is therefore
vibration free we have paid attention to the largest possible arc of contact so that slipping
is impossible even under the greatest loads the optimal positioning of the drive in the set axis
has the additional advantage of reducing the overall height of the machine connection panel
the open interface with db25 connection makes our agency compatible with most control systems
on the market safe the emergency stop connection for tool length sensor optional extension for a
fourth axis as well as an auxiliary port for even more options available there are three choices of
tool drives the standard version with one kilowatt and manual speed control or the version with the
quick-release fastener also with one kilowatt and speed control via CNC software or the 2.2 kilowatt
high frequency spindle version with a large a mounting head for tools up to 16 millimeter shaft
diameter for those who want to use their own drive systems we also deliver without motor these
are the most important facts that make the Hama agency an extremely reliable tool with highest
precision and durability repeatability vibration free torsional rigidity robust strong sighs and
made in Austria so when the agency arrives at your place it is already assembled adjusted and
lubricated which means unwrap it plug it in and you're ready to go however in order to give
the technical data or theory and expression we have of course also included a practical
test following the motto finest precision put into a nutshell and by the way don't forget to
subscribe to the channel you will see you again
