Building My TIMBER FRAME Cabin In One Day!!!

all right we're just dropping off 
at princess auto on the way up to   the property because we need to get a few uh 
maybe a few tools for assembling the frame   i want to get a big dead blow mallet so we can 
hit the timbers without doing any damage to it i should do a fist well the last pieces for my little shed are 
all loaded up this has been weeks and months   in planning and execution and it's all coming 
together finally we've got the fashion for the   dock we got all the remaining pieces for the shed 
we got ladders we got hammers we're ready to rock   so let's just hope that the weather holds out for 
us and that the joinery fits what could go wrong parkour it would have failed hey guys it's finally here the first edition 
off-grid samurai t-shirt if you enjoy this   channel and the content that we've been putting 
out lately please consider supporting our channel   by grabbing a t-shirt or joining us on the 
maker's mob this t-shirt will be available   only for the next four weeks it's a 
limited edition t-shirt so be sure to   click the link in the description 
box and snag yours while you can you didn't screw up i just didn't know how to adjust 
for mother nature's input okay this wood was all   dry when i cut it and i was hoping 
to have it assembled while it was dry   but it's been pouring rain up here 
and the wood has been exposed and so   now the wood is wet and wet wood likes to swell 
and so the joinery is going to be a lot harder   to fit together because it seems like all my 
tenons have grown about a sixteenth of an inch   just from the rain so i'm gonna have to do 
some adjusting to get these joints together hey so all right so turns out i uh cut one of the pieces   too long and then put the 
mortise in the wrong spot so long story short i had to make a new piece   and i only had yellow cedar so it's not 
going to match the rest of the fur but   there's yellow cedar rafters and we're 
all about diversity here you know so i'm just trying to get these joints to fit 
and then carry on assembling this frame here not bad she's tight it's too swollen i think we might just peg it 
after it's got a few days to dry keep going really yeah you're exhausted 
from 10 hits freaking giving it all   go you want to i switch off oh shut up oh my god i should be filming this come on boy almost there eighth of an inch okay we're good all 
right you take your blood pressure meds or what you like it when i stuff a camera in 
your face get the camera out of my face huh you need to undo this brace okay push that bean bag oh yeah yeah you're right i didn't think about it me first uh thank you one two up over you did nice job jesse well the weather didn't cooperate 
but the frame still went up pieces were cut wrong but the frame still went up we almost ran out of daylight 
but the frame still went up because this is the samurai till next time you

See also  MasterBrand to close cabinet plant, lay off 300

As found on YouTube