Introduction:
Gardening is a great way to enjoy the outdoors, connect with nature, and bring life to your surroundings. One of the best ways to enjoy your garden is by having the right kind of outdoor furniture. However, outdoor furniture can be expensive and may not always meet your needs. In this article, we will discuss how to build a DIY outdoor bench that is perfect for your garden and is affordable too. The instructions for building a DIY outdoor bench have been taken from a YouTube video by popular woodworker Steve Ramsey. Let’s dive in and check out the step-by-step process of building this amazing DIY outdoor bench.
Step-by-Step Process:
Step One: Cut the 2×4’s
The first step in building the outdoor bench is cutting the 2×4’s into various sized pieces. You will need two 34 inch long pieces, two 24 inch long pieces, six 13 inch long pieces, four 8 inch long pieces, and two 45 inch long pieces.
Step Two: Assemble the Backrest
Now it’s time to assemble the backrest of the bench. Take one 34 inch and two 13 inch pieces and place them inside the middle hole of the backrest. Align them so that the gap is even and the armrest is flush with the 34-inch piece. The armrest should be 24 inches above the board.
Next, use a pocket hole jig to attach the pieces. Drill two pocket holes on each side of the 13-inch pieces and fix them with pocket hole screws. Repeat this process with the other set of the backrest using the same technique.
Step Three: Attach the Center Braces
Now, you need to attach the center braces to the backrest. Measure 10.5 inches down from each side of the backrest and place the braces there. Fix them with pocket hole screws using your pocket hole jig for stability.
Step Four: Attaching the Seat and Armrest
Once the center braces have been attached, it’s time to attach the seat and armrest of the bench. Take the two 45-inch pieces and the four 8-inch pieces and fix them in place using pocket hole screws. The seat should be at the same level as the armrest. Repeat this process for the other side of the bench.
Step Five: Support the Seat
To support the seat, you need to cut two more 13 inch pieces and four 35 inch pieces. Attach these to the side of the bench frame at intervals of 3.25 inches using pocket hole screws.
Step Six: Add the Slats
Now it’s time to add the slats to the bench. Take 1×3 boards and place them on the seat. Make sure there is enough space between them so that they are evenly spaced. Glue them in place and fix them with brad nails.
Step Seven: Attach the Backrest
Now it’s time to attach the backrest to the seat. Draw a line on the angle and place the backrest at an angle using pocket hole screws. Repeat this process for the other side of the bench, and your DIY outdoor bench is ready.
Step Eight: Finish with Stain
To give a finished look to your bench, you can stain it. Choose a solid color stain that is suitable for outdoor furniture and apply it evenly on your bench using a brush.
Conclusion:
Building your own DIY outdoor bench is a great way to add a personal touch to your garden and save on heavy expenses. The step-by-step process mentioned in this article has made it extremely easy to build an outdoor bench, and you do not require extensive woodworking experience to build this masterpiece. The instructions taken from Steve Ramsey’s video have been explained precisely with the use of proper headings to guide you throughout the process effortlessly. So, gather your tools and materials and start building your own DIY outdoor bench to enjoy the tranquility of your garden in a more comfortable way.